Delivers smooth throttle response throughout the power band, Uses metering rods to transition between circuits, Lightweight all-aluminum body is compatible with gasohol and blended fuels, Float levels are factory set and adjustments are rarely needed, Overall height is 4.35″ and bolt pattern measures 5.160″ x 5.625″
Edelbrock 1405 Performer 600 CFM 4 Barrel Carburetor, Manual Choke
Sku # 3251405
Mfr. Part # 1405
Condition
New
Brand
Edelbrock
Sold
Each
Details
Notes
Comes with:
Metering Jets – Primary .100, Secondary .095
Metering Rods – .070 x .047
Step-Up Spring – orange (5″ Hg)
Manual choke
Bolt-on-and-run performance right out of the box
Smooth throttle response throughout the power band
Uses metering rods to transition between circuits – rods can be changed in seconds without carburetor removal or draining fuel
Float levels are factory set; adjustments are rarely needed
Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
Two-piece design means no gaskets below the fuel level for leak-free operation
Lightweight all-aluminum body is compatible with gasohol and blended fuels
Includes both timed and full vacuum ports for ignition advance
Info
Edelbrock Performer Series four barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance 4 barrel carb to top off your hot rod, the Edelbrock Performer Series carbs are the best choice for performance and value. All Edelbrock parts are proudly made in the U.S.A.
This 600 CFM 4 barrel carburetor is designed and calibrated for optimum street performance in small-block and some big-block engines. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design. Includes manual choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately.
Charts
(PDF)
WARNING: Cancer and Reproductive Harm — p65Warnings.ca.gov
California Customers: This part has been identified as emissions sensitive and can only legally be installed on race-use only vehicles, off-road-use only vehicles, or pre-1965 vehicles in the State of California in accordance with the California Air Resource Board (CARB) requirements. Once your order is placed you will be contacted by Speedway Motors within 2 business days so that you can certify that you will only use such parts on these types of vehicles in California.
Specs
Material Type
Aluminum
Sold in Quantity
Each
Finish
Satin
Color
Silver
CFM
600 CFM
Choke Type
Manual
Fuel Type
Gasoline
Carburetor Barrels
4-Barrel
Fuel Inlet Type
Single
Carburetor Flange Type
4-Barrel Square Bore
Secondary Type
Air Valve
New or Remanufactured
New
Notes
3-1/4″ from bottom of carb base to the base of the carb neck. Mounting bolt hole pattern is 5-1/8″ by 5-5/8″.
MFG. Part #
1405
Gasket(s) Included
Yes
Overall Height
4.35
GTIN Code
085347014057
Inlet Fitting
5/8-20 THREAD
CFM Range
600-699 CFM
Bolt Hole Pattern
5.160″ x 5.625″
Reviews
Great carburetor
Rated
by Creshunter on January 26, 2021
Summary:
Installed on a old school Chevy 350 with a cam and headers. Just a little bit of tweaking and it runs great! Looks great too!!
Yes, I recommend this product.
I have always liked edelbrock carbs.
Rated
by dick hayden on October 13, 2019
Summary:
It was installed on my 1966 ford mustand, replacing same as what was installed in 1995
Pros:
very easy to install and very easy to adjust.
Yes, I recommend this product.
Put this on my hot rod 47 Ford, ran perfect.
Rated
by Ragtopa on September 14, 2019
Summary:
Fit and worker perfect.
Yes, I recommend this product.
I would buy again
Rated
by none on March 17, 2019
Summary:
going to install on my 52 chevy. truck good carb. easy to install works great
Yes, I recommend this product.
I have been very happy with these carbs
Rated
by Chris on January 02, 2019
Summary:
I have a Buick Nailhead with a two four intake, just the carb I need for my 425
Related Items / Suggested Parts
Edelbrock 1404 Performer 500 CFM 4 Barrel Carburetor, Manual Choke
Edelbrock 1479 Performer Carburetor Calibration Kit, 1405
Edelbrock 14053 Performer 600 CFM 4 Barrel Carb, Manual Choke, Black
Lokar TCB-40DQ1 Edelbrock Throttle Cable Bracket/Springs, Progressive
Lokar XTCB-40DQ1 Black Edelbrock Thottle Cable Bracket/Springs
Edelbrock 1478 Performer Series Electric Choke Conversion Kit
Edelbrock 1477 Performer Carburetor Rebuild Kit
Edelbrock 8126 Performer Carb Fuel Line Kit, 3/8 Inch Hose Barb Inlet
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We’re here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods – PayPal and major credit cards are accepted.
Terms – Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.